Skip to content

Glossary

Control

Aim
The point the operator wants the lights to illuminate.

Brightness
The master dimmer level requested by the operator.

Commanded circle
The requested circular spot on the projection surface. Its size is the commanded diameter.

Pin
The interactive marker used to move the aim across the stage floor in the controller.

Beam solution

Beam
The cone of light emitted by one fixture toward the aim.

Beam solution
The engine's per-fixture result: aim direction, cone angle, footprint, light level, and realization limits.

Quality
A beam solution score from 0% to 100%, based on footprint size, skew, and incidence.

Actual projection
The footprint produced on the projection surface by a solved or realized beam.

Failure reason
The reason a beam is degraded or unusable, such as geometry, incidence, skew, size, grazing, or insufficient flux.

Stage geometry

Stage
The configured three-dimensional performance area and its boundaries.

Front
The audience-facing orthographic view, showing stage width and height.

Back
The stage edge farthest from the front edge.

Floor
The horizontal plane at height Y = 0.

X
Horizontal stage position: negative is left and positive is right.

Y
Vertical position, with zero at the floor.

Z
Depth position in the engine coordinate system. Positive points toward the audience, while the controller's stage depth is mapped into this axis.

Stageplot
The controller's orthographic visualization of the rig, stage, beams, footprints, and solver state.