ReJoySpot / Moving-head control for iPad
Your stage.
Your lights. Your aim.
ReJoySpot turns your iPad into a controller for moving-head lights. Calibrate your stage in the camera view, choose where to aim, and let ReJoySpot work out each fixture's beam.
For iPad running iOS 18 or later. A compatible network-to-DMX receiver and moving-head fixtures are needed for lighting output.
How it works
One network. A light that follows.
The camera sees the stage. ReJoySpot on the iPad calculates where each light should aim, then sends sACN or Art-Net over Ethernet. The node converts those commands to DMX for the moving head.
- Ethernet network cables
- DMX cable
- USB-C connection
Example wired setup with Auto Follow and an external camera (Full features). The switch can power a PoE-compatible camera; other devices need their own power unless PoE-compatible. Diagram and iPad display are schematic. On small screens, scroll the diagram sideways. Animation respects reduced-motion preferences.
- See. The IP camera sends the stage view to ReJoySpot through the switch.
- Calculate. ReJoySpot uses your stage calibration and fixture positions to aim at the target.
- Illuminate. sACN or Art-Net commands travel through the switch to the node, then DMX runs by cable to the moving head.
See it in action
Meet ReJoySpot
Video hosted by YouTube. Watch on YouTube ↗
From camera to cue
Aim at the stage, not at DMX values.
Camera-based aiming
Match the camera image to your stage with four-corner calibration, then aim directly in the view. Top, front, and side plots help you see the stage and beams.
Shows and presets
Keep stage dimensions, rig, calibration, and presets together in a Show. Store positions for quick recall and protect a Show against accidental edits.
Your fixtures, your rig
Create fixture profiles manually or import a GDTF file. Set each fixture's position, patch, and pan/tilt calibration to match your physical rig.
More control with Full
Use a gamepad, follow a person with Auto Follow, or work with an external camera. Full also adds sACN output and access to all four fixture slots.
Getting started
Bring your rig into view.
For the wired setup shown above, you need an iPad, a moving-head light, an sACN / Art-Net-to-DMX node, a compatible IP camera, a network switch, a USB-C to Ethernet adapter, Ethernet cables, and a DMX cable. These are standard, readily available hardware components. A beginner choosing entry-level equipment can likely put together the hardware for under $1,000, including the iPad; actual costs depend on the models, local prices, and whether you buy new or used. External-camera support requires ReJoySpot Full.
- Connect your rig. Connect your iPad and a compatible network-to-DMX receiver to the same network, then configure the receiver address and universe in ReJoySpot.
- Set the stage. Enter your stage dimensions, add your fixtures, and configure their DMX patches and positions.
- Calibrate the view. Secure the iPad in a fixed position and match the four stage-floor corners in the camera image. Start calibration in landscape, and recalibrate if the camera moves.
- Aim and save. Choose your target in the camera view and store presets for the positions you want to recall.
Start free
Try your setup. Expand when you need to.
Free
- One Show
- Four presets per Show
- Two fixtures per rig
- Camera-based aiming and Art-Net output
Full
A one-time in-app purchase of $39.99 unlocks additional capabilities, including:
Prices vary by country or region. Check the App Store for your local price.
- All four fixture slots
- Gamepad control and Auto Follow
- External cameras and camera mirroring
- sACN output and advanced stage settings
- Focus, frost, and temperature controls for compatible fixtures
Unlocked features stay unlocked. The purchase covers features introduced within 12 months of purchase; later feature generations may require another purchase.